44
MS 460, MS 460 C
– Clean both halves of the
crankcase.
– Stick the heat reflecting foil in
position, without creases, so that
it covers the housing wall at the
clutch side.
VA
176RA146
If the crankcase is new, perform the
following additional operations.
– Install the chain brake,
b
5.4.3
– Fit bar mounting studs,
b
5.6
– Install chain tensioner,
b
5.5
Install all other parts in the reverse
sequence.
– Remove the shroud,
b
6.4
:
Remove the cover (1).
:
Unscrew the decompression
valve (2).
Install in the reverse sequence.
VA
176RA147
2
1
– Fit the decompression valve and
tighten it down firmly,
b
3.5
– Fit the cover (1).
– Fit the shroud,
b
6.4
Exercise extreme caution when
troubleshooting or carrying out
maintenance and repair work on the
ignition system. The high voltages
that occur can cause serious or
even fatal accidents.
Troubleshooting on the ignition
system should always begin at the
spark plug,
b
4.4
The electronic (breakerless) ignition
system basically consists of an
ignition module (1) and flywheel (2).
VA
176RA148
2
1
6.8
Decompression Valve
7.
Ignition System