22
MS 460, MS 460 C
:
Secure bell crank with E-clip
(arrow).
– Coat the brake band with chain
oil to protect it from corrosion and
help reduce "snatching" during
the first few brake applications.
VA
176RA043
:
Attach brake band to the bell
crank (arrow).
– Position the brake band behind
the lugs on the crankcase.
176RA044
VA
:
Push brake band into slot.
– Coat screw with Loctite and fit,
b
16.
– Tighten down the screw firmly,
b
3.5
VA
176RA045
:
The turns of brake spring must be
tightly against one another in the
relaxed condition. If this is not the
case, replace the brake spring.
:
Check correct position of
protective tube:
a
a
b
VA
176RA046
a = 20 mm
b = 32 mm
:
Attach brake spring to bell crank
(arrow).
VA
176RA047
:
Use assembly tool (2)
1117 890 0900 to attach the
brake spring (1) to the anchor pin.
VA
176RA048
1
2
– Place cover in position.
:
Insert screws (arrows) and
tighten down firmly,
b
3.5
:
Install clutch drum/chain
sprocket,
b
5.1
VA
176RA026