36
MS 460, MS 460 C
– Remove the piston,
b
6.5.1
– Remove the rings from the
piston.
:
Use a piece of old piston ring to
scrape the grooves clean.
VA
176RA091
:
Install the new piston rings in the
grooves so that the radii at the
ends of the rings face upward.
– Install the piston,
b
6.5.2
VA
176RA092
– Remove the brake band,
b
5.4.2
– Remove the chain catcher,
b
5.2
– Remove the flywheel,
b
7.3
– Remove the cylinder,
b
6.5.1
– Drain the oil tank.
– Drain the fuel tank.
Dispose of fuels and lubricants
properly in accordance with local
environmental requirements.
:
Pull the worm with drive spring
(arrow) out of the oil pump and off
the crankshaft.
VA
176RA093
:
Take out the screws (arrows).
– Remove the oil pump.
VA
176RA094
:
Take the sealing ring (arrow) out
of the housing bore.
– Remove the piston,
b
6.5.1
– Remove the ignition module,
b
7.1.2
VA
176RA096
– Remove the oil seals,
b
6.3
– On machines with heated
handles, remove the generator,
b
14.5
– Remove the piston,
b
6.5.2
VA
176RA101
6.6
Piston Rings
6.7
Crankcase
6.7.1
Removing the Crankshaft