67
MS 460, MS 460 C
– Remove the filter base,
b
12.1
:
Pull the grommet off the adjusting
screws and out of the housing.
VA
176RA255
– Open the throttle wide.
:
Disconnect the throttle rod from
the throttle trigger.
VA
176RA256
:
Disconnect the throttle rod from
the throttle shaft.
VA
176RA257
:
Remove the baffle plate with
grommet and throttle rod.
Machines with carburetor heating
VA
176RA258
:
Pull the heating element off the
studs.
– Separate pin and socket
connection for thermostatic
switch,
b
13.3
VA
176RA259
:
Pull off the carburetor.
Reassemble in the reverse
sequence.
VA
176RA260
:
Before fitting the carburetor,
check that the sleeve (1) and
washer (2) are in place.
VA
176RA261
1
2
:
When pushing the carburetor into
position, check that the impulse
hose (1) and fuel hose (2) are
correctly seated.
1
2
VA
176RA262
:
Fit the grommet so that the
rubber tabs (1) locate between
the housing rib (2).
VA
176RA263
1
2
12.2
Carburetor
12.2.1 Removing and Installing