41
MS 460, MS 460 C
– Wait for crankcase to cool down.
:
Push the stop buffer into the
guide so that its lugs are behind
the housing rib.
VA
176RA126
:
Push the two annular buffers,
tapered end first, into position so
that their annular grooves (1)
engage the housing rib (2).
:
Install the suction hose,
b
11.1
VA
176RA127
2
1
:
Screw spindle of service tool ZS
(2) 5910 007 2200 fully home
and then screw the threaded
sleeve (1) 5910 893 2420 onto
the spindle.
VA
176RA128
1
2
– Lubricate tapered stub of
crankshaft with oil.
:
Place tapered stub of crankshaft
in ball bearing at the flywheel side
of the crankcase.
VA
176RA129
:
Screw threaded sleeve (1) to
thread (2) of crankshaft stub.
VA
176RA130
2
1
:
Hold the spindle steady and
rotate the service tool counter-
clockwise until the drilled plate
butts against the crankcase.
VA
176RA131
:
Turn the spindle clockwise until
the crankshaft locates against the
ball bearing.
The connecting rod must point
toward the cylinder flange while the
crankshaft is being installed.
VA
176RA132