Original instructions
Original instructions
• If purchasing a Sterwins lawn mower with a deck made of galvanized steel, the deck is covered
with a 10-year warranty against corrosion.
In the event of a breakdown, please refer first to the troubleshooting page (problems and
solutions) in the brochure; if the problem persists, please check with the nearest store.
Your store shall spare no effort in resolving the issue.
Repairs and change of parts do not extend the duration of the initial warranty.
Breakdowns resulting from normal wear and tear or from improper use of the product are
not covered by the warranty. This includes, among others, the switches, the safety circuit
breaker and the motors, in case of wear.
Please note that there are specific warranty terms for certain countries.
In case of doubt, please check with your point of sale.
For claims relating to the warranty to be taken into account, the following is required:
• Providing proof of purchase
• That no repairs and/or change of parts have been performed by a third party.
• That the issue is not a matter of normal wear and tear.
• That required maintenance and repair works have been performed correctly.
• That no deterioration has taken place as a result of incorrect setting of the carburetor
• That there has been no forcing, improper handling, unauthorized use, or accidents
• That no deterioration has taken place due to overheating, resulting from clogging of the
ventilator block.
• That no work has been done on the product by an unskilled person, and no incorrect repairs
have been attempted.
• That the tool/battery/charger have never been disassembled or opened.
• That the tool/battery/charger have never been in a wet environment (dew, rain, submerged
in water...)
• That no incorrect parts have been used, parts not made by STERWINS, whereas they prove to
be the cause of deterioration
• That the tool has not been used improperly (overloading the tool, or use of non-approved
accessories).
• That no damage has resulted from external causes, or foreign bodies such as sand or stones.
• That no damage has resulted from non-compliance with safety recommendations and use
instructions.
The product must be used under normal usage circumstances, and for non-professional
purposes. Therefore, excluded from this warranty are products used by landscaping companies,
local authorities, as well as companies offering paid rentals or free loaning of equipment.
6. WARRANTY
7. MAINTENANCE, STORAGE AND TRANSPORTATION
Before and after each use, check the product and accessories for wear and damage. If required,
exchange them for new ones as described in this instruction manual. Observe the technical
requirements. Check the level of the fuel and engine oil before each use, add the fuel and the
engine oil if it is under the low lever.
Please refer to the B&S operator’s manual for the maintenance of the engine parts.
WARNING!
Wear protective gloves when working on the cutting device and close to it!
Use proper tools to remove debris! Never use your bare hands!
WARNING!
Always use original spare parts for replacement. Do not attach any other
type of cutting device!
WARNING!
The replacement of the cutting device should be done by an experienced
user! Rework or sharpening blades is not recommended unless it is done by a repair
service or a similarly qualified specialist!
1. Keep the deck and cutting device clean and free of debris. Remove clippings from the
discharge chute.
2. Check all nuts and bolts periodically for tightness before operation. After prolonged use,
especially in sandy soil conditions, the cutting device will become worn and lose some of
the original shape. The cutting efficiency will be reduced and the cutting device should
be replaced.
3. Keep the cutting device sharp to ensure a good cutting performance. Replace a worn or
damaged cutting device with a new one of the same type or have it sharpened by a qualified
specialist.
4. Replace the cutting device with a new one of the same type.
5. Lubricate the cutting device after each use to prolong the life span of cutting device and
product. Apply light machine oil along the edge of the cutting device.
6. Inspect the grass catcher before each use. Do not use it if you find any damage.
7. Clean the grass catcher after operation using water and mild soap.
8. Let the grass catcher dry thoroughly before storing to avoid mildew.
9. Check the performance of the wires before each use. Ask a qualified specialist to adjust it
if necessary.
Storage:
The following steps should be taken to prepare lawn mower for storage.
1. Empty the tank if you are not going to use the product for an extended period of time
(more than 30 days) and before storing it for the winter.
a) Empty the petrol tank with a suction pump.
FR
ES
PT
IT
EL
PL
RU
KZ
UA
BR
EN
RO
FR
IT
EL
PL
RU
KZ
UA
BR
EN
RO
ES
PT
234
235
Summary of Contents for PLM1-46H145.5
Page 8: ...12 13 3 2a 1 1 2 2 0 91L 95 3b 3a 3c 2 ...
Page 9: ...14 15 6 7 5 4 3 2 1 4 4a 4b 1 2 3 4 5 6 7 i 25 75mm 15 2 1 3 5 6 7 STOP 1 2 ...
Page 11: ...18 1 5 STOP 6 7 19 45 8 11 9 10 12 ...
Page 13: ...22 23 45 9 12 9 1 6 7 8 12 13 11 EAN DAYE 263001465 44 46N m 10 14 15 DAYE263001465 ...
