6. WARRANTY
5. TROUBLESHOOTING
9. Mower doesn’t move while grasping the self-drive control handle:
•Belt malfunction, belt can only be done by authorized personnel, please contact customer
service center.
•The self-drive control wire is too loose, tighten the self-drive control wire: Screw the
adjusting bolt of self-drive control wire to a suitable position.
10. Mower moves without grasping the self-drive control handle:
•The self-drive control wire is too tight, loosen self-drive control wire: Screw the adjusting
bolt of self-drive control wire to a suitable position.
5. TROUBLESHOOTING
In you encounter some problems with this tool, please follow these solutions.
If you cannot resolve your problem, please contact our service agent.
1. Engine does not start:
•Fill tank with fuel.
•Clean air cleaner element.
•Tighten spark plug.
•Install spark plug wire on spark plug.
•Set gap between electrodes (customer service center).
•Install new, correctly gapped plug.
•Remove air cleaner element and pull starter rope continuously until carburetor
clears itself and install air cleaner element.
•Carburetor malfunction, carburetor adjustments can only be done by authorized personnel
(customer service center).
•Spark plug malfunction, spark plug connector malfunction can only be done by authorized
personnel, please contact customer service center or B$S authorized service dealer for service.
2. Engine difficult to start or loses power:
•Drain fuel and clean tank. Fill tank with clean, fresh fuel.
•Clean or replace fuel tank cap.
•Clean air cleaner element.
3. Engine operates erratically:
•Install new, correctly gapped plug.
•Set gap between electrodes (customer service center).
•Clean air cleaner element.
4. Engine idles poorly:
•Clean air cleaner element.
•Remove debris from slots.
•Remove debris from cooling fins and air passages.
5. Engine skips at high speed:
•Set gap between electrodes (customer service center).
6. Engine overheats:
•Remove any debris from slots in shroud, blower housing, air passages.
7. Mower vibrates abnormally:
•Tighten blade.
•Balance blade.
8. White smoke appears in the exhaust port when starting the machine:
•It is caused by the burning of the oil that moves into the cylinder. It will be normal when
the machine continues to operate for about three minutes
Original instructions
Original instructions
Thank you for choosing this product. Upon designing and manufacturing our products, we place
all of our efforts into ensuring an excellent quality that meets the needs of the users.
IMPORTANT! PLEASE READ THIS MANUAL BEFORE USING THIS PRODUCT, FOLLOW THE
BASIC SAFETY WARNINGS WITHIN, AND KEEP IT CAREFULLY.
As soon as you open the packaging, we recommend that you check to ensure that all elements
required for assembly of the product have been included, in order to do this, please refer to
page 2 of this manual.
If the product is damaged or has some defects, please do not use it, and bring it back to the
nearest store.
This product is intended for outdoor use only, and must not be used inside a building under
any circumstances.
This product can be placed inside a building only after having rested for two hours after the
last use.
We thank you for your business and hope that you will be totally satisfied upon using our
product.
We will be happy to receive all of your remarks on our online store web site.
Warranty
STERWINS products are designed based on the most rigorous quality standards for products
intended for the general public.
The products are covered with a warranty of 3 years starting from the date of purchase. This
warranty covers all manufacturing or material defects.
FR
ES
PT
IT
EL
PL
RU
KZ
UA
BR
EN
RO
FR
IT
EL
PL
RU
KZ
UA
BR
EN
RO
ES
PT
232
233
Summary of Contents for PLM1-46H145.5
Page 8: ...12 13 3 2a 1 1 2 2 0 91L 95 3b 3a 3c 2 ...
Page 9: ...14 15 6 7 5 4 3 2 1 4 4a 4b 1 2 3 4 5 6 7 i 25 75mm 15 2 1 3 5 6 7 STOP 1 2 ...
Page 11: ...18 1 5 STOP 6 7 19 45 8 11 9 10 12 ...
Page 13: ...22 23 45 9 12 9 1 6 7 8 12 13 11 EAN DAYE 263001465 44 46N m 10 14 15 DAYE263001465 ...
