Standard Horizon CPF180I, Owner'S Manual

Page: 19 / 166

CPF180i and CPF300i Page 21
0.78" [Ø20 mm]
0.13
” [Ø3.2mm]
GPS OVERALL SHAPE
Figure 2.3.0a - Installing the External GPS antenna (II)
Smart GPS Cable
Pin Wire Color Description
1 Red Battery Positive
2 Green Smart GPS NMEA Input
3 Brown Smart GPS NMEA Output
4 NC
5 NC
6 Black/Yellow Battery Ground
2.4 CONNECTIONS
The CPF180i and CPF300i have connectors that allow them to be connected to a power
supply, optional WAAS GPS antenna, NMEA Devices* such as Optional Video Camera
(CPF300i only) VHFs, AIS Receiver, Digital Instruments and autopilots.
NOTE
The GPS Chart Plotter can send many sentences to external NMEA devices*. The NMEA Output
wires are yellow and white (CPF180i and CPF300i) and white (CPF300i). If you have connected
devices as shown in the following table and need to feed NMEA to other devices (Autopilot,
RADAR…) you can parallel wires from the yellow, brown or white wires to other devices.
NOTE*
RS232 not opto-isolated electrical interface
2.4.0 CPF180i Connection Table
Power Data Cable
Pin Wire Color Description Connection Example Additional Comments
1 Black Battery Ground
Connect to Battery Ground
2 Red Battery Positive
Connect to Battery Positive
3 Green NMEA Common Common (ground) for NMEA devices**
4 Blue Port1 Input Connect to Output of NMEA devices** Default is NMEA0183
5 Brown Port1 Output
Connect to Input of NMEA devices** Default is NMEA0183 with GGA, GLL, RMC,
DBT, DPT, MTW, VHW and XTE sentences
6 Grey NC
7 White NC
8 Yellow Port 3 Output Connect to Input of NMEA devices** Default is NMEA0183 with APA, APB, BOD,
GGA, GLL, RMC and XTE sentences*