manualshive.com logo in svg

Standard Horizon CPF180I, Owner'S Manual

Share
Download
Standard Horizon CPF180I Owner'S Manual Download Page 69

CPF180i and CPF300i

Page 71

WARNING

After entering in all the Marks it is a good practice to backup the points to a User C-CARD. Refer
to Section 11.

7.4

GOTO CURSOR, ROUTE AND MARK

The CPF180i and CPF300i can easily be set to start navigating to the Cursor on the chart
page, a saved Mark or a Route that was created.

GOTO CURSOR

1. Move the ShuttlePoint knob to the exact position you want to navigate to.
2. Press

 [GOTO]

 and a GOTO popup window will be shown

Figure 7.4 - GOTO menu (1)

3. Move the ShuttlePoint knob to highlight 

CURSOR 

and press

 [ENT]

.

Figure 7.4a - GOTO menu (2)

4. The GPS Chart Plotter is now navigating from your current position to the location

selected at step 1. A bearing line between the vessels location and the destination point
is shown. A popup window shows the Distance (DST) and Bearing (BRG) from the
vessels location to the destination point.

Summary of Contents for CPF180I







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands