Standard Horizon CPF180I, Owner'S Manual

Page: 73 / 166

CPF180i and CPF300i Page 75
9. ROUTES
The CPF180i and the CPF300i have the capability to store 50 Routes with 100 Waypoints
or Marks in each Route. A Route can consist of Waypoints or Marks. The difference is when
a Route is made using Waypoints and the Route is deleted the Waypoints are also deleted.
However if a Route is made of Marks and the Route is deleted the Marks stay in memory.
NAVIGATION LINE
(or DESTINATION Line)
STARTING Position
SHIP
Na v igation Course
WPT002
PERPENDICULAR TO
THE NAVIGATION LINE
When the Ship passes the
perpendicular of the
NAVIGATION LINE, the
Destination is mo v ed to then
next Waypoint in the Route
WPT001
(Destination)
Figure 9 - Example to show how the plotter switches from one Waypoint to another
9.0 CREATING A ROUTE USING WAYPOINTS
1. On the Chart page move the ShuttlePoint knob to the Lat/Lon of the starting Waypoint
in the Route.
2. Press [ROUTE] , you will notice the Starting Waypoint will be placed under the
cursor.
3. Move the ShuttlePoint knob to the second Lat/Lon of the next leg in the Route.
4. Press [ROUTE] . You will notice another Waypoint is shown under the cursor and a line
joins the starting Waypoint to the Second Waypoint.
Figure 9.0 - Creating a Route using Waypoints
5. Repeat steps 3 and 4 until all Waypoints are entered into the Route.