Standard Horizon CPF180I, Owner'S Manual

Page: 74 / 166

Page 76 CPF180i and CPF300i
NOTE
At this point the Route is saved as ROUTE01. If you would like to save the Route under a specific
name follow the next steps.
9.1 CHANGING THE NAME OF A ROUTE
To name the Route:
1. Press [MENU] , move the ShuttlePoint knob to highlight USER POINTS and press
[ENT] .
2. Move the ShuttlePoint knob to highlight ROUTE and press [ENT] .
3. Move the ShuttlePoint knob to highlight EDIT ROUTE and press [ENT] or move the
ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to highlight NAME and press [ENT] . A popup window will
be shown.
5. Move the ShuttlePoint knob up/down to change the characters and left/right to select
a different character in the Routes Name.
EDIT RO U TE
Figure 9.1 - Edit Route (Route Report)
6. When finished press [ENT] to save.
7. Press [CLR] to show the Chart page.
9.2 CREATING AN OLYMPIC ROUTE
This feature allows the starting point in a Route to be saved as the final destination point.
1. On the Chart page move the ShuttlePoint knob to the Lat/Lon of the starting Waypoint
in the Route.
2. Press [ROUTE] , the starting Waypoint will be placed under the cursor.
3. Move the ShuttlePoint knob to the second Lat/Lon of the next leg in the Route.
4. Press
[ROUTE] . Another Waypoint is shown under the cursor and a line joins the
starting Waypoint to the second Waypoint.
5. Repeat steps 3 and 4 until all Waypoints are entered into the Route.