20
PRE/POST INSTALLATION CHECKLIST
SUMMARY:
This section provides a list of items that are required to be checked during the final assembly and after installation of the bikes,
to ensure that they have been put together correctly, working correctly, installed correctly,
every time, for every Customer
.
Note: This
checklist, along with other section contained in this SOP
(along with reference material provided, within)
must be used during the build
and during the installation of bike. Note: Failure to assemble or install the bikes correctly, could result in installer having to go back
out and fix bikes at no cost to Stages Indoor Cycling, or back billing the installer for work that may need to be performed, as a result of
the improper assembly or installation of bikes.
DETAILS:
PRE/POST INSTALLATION CHECKLIST
Check Forward/Aft slides on seats and handlebars
Silicone
Set to 0 (and tightened)
Check up/down slides on seat and handlebars
Silicone
Handlebars all set to same height (and locked into place)
Seats all set to the same height (and locked into place)
Check and adjust the tension on the FitLoc system
Handlebars
Seats
Check Bike Leveling
Adjust stabilizer to floor (adjust all the way up first into stabilizer, then to floor)
Tighten nut against stabilizers after leveled
Check console
Ensure tight on handle bar stem
Ensure set evenly between front and back of handlebar
Ensure thumb screw is installed and tight
Ensure back light is set to “ON”, or to customer specification if non (1/3/5/10 or 15 seconds)
Ensure that Kcal’s are turned to “ON”, or to customer specification if non (necessary to see heart rate readings on console)
Ensure that Unit of Measurement is set to English if in US or Metric or to Customer’s specification (automatically set to
English)
Set Auto Pause to “OFF” if there is a designated instructor bike or if requested by customer
Ensure Accessories are installed (if purchased)
Aerobars
Aerobar number caps
Media Shelf
Dumbbell holders
Check tightness of all bolts
Console/Console base
Accessories (if installed)
Stabilizers
Power Meter
Pedals
Seats (level and in-line with handlebars)
Ride and function check the bike
Listen for rubbing noises (metal to metal, plastic, etc.)
Listen and feel for vibrations
Test resistance knob and SprintShift lever
Console is displaying data (if all functioning, perform external reset)
Perform adjustments as necessary
Remove any extra packaging material
Ensure bikes is positioned in customers requested locations (post install only)
Clean bikes
Next Step:
Proceed to the Bike Transportation and Installation section of this SOP.
