8
POWER METER INSTALLATION
SUMMARY:
This section provides information on how to remove, replace and install the Power Meter on the Stages SC3.18 Indoor
Cycling bikes.
Note: It is not recommended that you use power tools in the assembly of Stages Indoor Cycling bikes.
DETAILS:
Removal or replacement of Power Meter:
1.
Remove the pedal from the current power meter and set
aside, along with the pedal washer.
2.
Remove the power meter from the bike.
Note: Power
Meters are self-extracting and don’t require a crank arm
puller.
Removal of left crank arm to install Power Meter:
Remove the left crank arm from the bike to allow for the
installation of the power meter.
Note: Keep this crank arm
for the customer, as they may want it for the future. Crank
arms are self-extracting and don’t require a crank arm
puller.
Assembly of Power Meter:
1.
Remove the Power Meter contents from its box.
Note:
This can be done by unfolding the cardboard inset that
houses the Power Meter and it will slide out (no need to cut
the plastic).
2.
Using a small Phillip's screw driver (Size 0), open up the
battery door on the power meter and install the (2) AA batteries
(positive side up) provided (
DO NOT
remove tape from batteries,
batteries need to stay taped together to prevent lateral movement
during operation) close the battery door and tighten
. Note: Make
sure to push down on batteries, prior to closing battery door (to
help ease the pressure on the battery posts). Do not over tighten
door as it can break the door.
