31
SprintShift moves when adjusting
standard resistance knob
SprintShift knob is bad or bent
Order replacement parts and replace.
Detent in SprintShift is not
holding
Order replacement part and replace.
Rattling noise on bike
Screws on shield or inside front
covers are loose
Check all screws and tighten as necessary
Plastic to plastic rubbing sound
Power meter or right crank arm
rubbing on side covers
Re-adjust side covers
Clunking noise or spoiling of
cooper wire in/from generator area
of SC3.18
Generator screw or generator
has come loose
Order replacement part and replace
Clicking noise in from inside of belt
covers
Covers are not aligned properly
Re-align covers
Side to side movement at pedal
area
Bottom bracket has come loose
or needs replacing
Remove cranks and check, replace as necessary
Clicking noise in pedals
Cleats are to lose or tight
Adjust cleat tension
Pedal is clicking by crank arm shaft Remove and lubricate pedal
Knocking sound in flywheel area
Bearing have come loose from
flywheel
Order spacers for flywheel axle and install parts
Clicking noise on outside of covers
Pedals straps are hitting the
ground every rotation
Tuck the pedals straps into the clips
Seat or Handlebar tubes
sleeves are coming out when
moving seat or handlebars
Preventative Maintenance is not
being performed on bikes
Lubricated seat or handlebar slides
Tabs on sleeve(s) are broken or worn Replace sleeve(s)
Console is loose on handlebars
Screws attaching console base to
handlebar stem have come loose
or washer is needed
Remove console, tighten screw or insert washer in
base and re-install console. Order parts if needed