26
FITLOC ADJUSTMENT
SUMMARY:
This section provides you with the information necessary on how to adjust the FitLoc levers on the bikes.
DETAILS:
How to use:
1.
Hold the seat and PULL the lever forward to unlock and
adjust.
2.
Once seat height is set, PUSH the lever back to lock it.
3.
An audible “CLICK” indicates the lever is fully locked.
Use the same process to adjust handlebars.
4.
Tension on the lever should ONLY be adjusted by an
instructor or service tech if FitLoc becomes too tight and will
not fully lock, or becomes too loose and will not engage.
How to adjust
:
How to loosen the tension:
1.
Hold onto the seat or handlebar with one hand and unlock
the FitLoc lever (pulling out as far as possible).
While the lever
is pulled out as far as possible, turn the small micro-adjustment
dial (black dial) to the LEFT in small increments with a 6mm
Allen.
2.
Test by locking it into place and continue to adjust until the
FitLoc can be firmly locked into position, but isn’t too tight or
too loose.
3.
Turn in small increments until the FitLoc lever can be
firmly locked into position.
How to tighten tension:
1.
Hold onto the seat or handlebar with one hand and unlock
the FitLoc lever (pulling out as far as possible).
2.
While the lever is pulled out as far as possible, turn the
small micro-adjustment dial (black dial) to the right in small
increments with a 6mm Allen.
3.
Test by locking it into place and continue to adjust until the
FitLoc can be firmly locked into position, but isn’t too tight or
too loose.
4.
Turn in small increments until the FitLoc lever can be
firmly locked into position, but isn’t too tight or too loose.
Note: The micro-adjustment on the FitLoc should NEVER be
used by riders or members.
