Page 8 of 60
Spirit Fires Limited. 4 Beaumont Square, Aycliffe Industrial Park, Newton Aycliffe, County
Durham, DL5 6XN. Tel : 01325-327221 Web :
www.spiritfires.co.uk
Unpacking the Appliance
Read these instructions fully before starting to install the fire.
Carefully examine the carton for any exterior transport damage, if in doubt
consult the manufacturer before proceeding. Remove the gas fire and examine
its general condition. If it has any damage is visible contact the supplier to
get instructions on how to proceed. If fully satisfied by the condition of the
appliance then proceed with the installation.
Please Note that no claims will be accepted for damaged or marked
goods once the appliance has been installed.
Parts List
•
The gas fire is supplied as a self contained gas fire including:
o
Gas Appliance
o
Ceramic Set [logs or pebbles as purchased]
o
Installation Booklet.
o
Remote Handset.
o
Battery Pack.
o
Fitting Kit.
If any of the above are missing please consult the supplier before proceeding.
Important Notes about the FR920HE Design
Gas Burner :
The
FR920HE
has a modern gas burner with a ribbon of flame.
It is supplied with a log set and special wool to create a sparkling ember effect.
The logs and wool must be positioned exactly as shown in the manual. The gas
burner features a sensitive pilot assembly. Never tamper with the pilot
assembly or shield. Only use manufacturer supplied parts. When performing
repairs on this gas appliance.
Installation Style :
The
FR920HE
is a high efficiency gas fire built to the
latest approval standards. The fire is tested to different approval standards
depending on how it will be installed. Review the paperwork supplied with the
fire to identify which version has been purchased by the customer. Each
version has a different set of installation instructions. The fire is supplied from
the factory pre-set for the type of install. It cannot be converted at a later
date. For this reason the fire is supplied to site as the following models:
•
FR920HE-BS7977
•
FR920HE-EN613
