Speedtouch SpeedTouch 716v5 (WL) Cli Reference Manual Download Page 547

Page: 547 / 796

PPP Commands

E-DOC-CTC-20060414-0006 v1.0

525

PPP Commands

Introduction

This chapter describes the commands of the

ppp

command group.

Contents

This chapter covers the following commands:

ppp flush

Flush all PPP interfaces.

526

ppp ifadd

Create a new PPP interface.

527

ppp ifattach

Attach a PPP interface.

528

ppp ifconfig

Configure a PPP interface.

530

ppp ifdelete

Delete a PPP interface.

534

ppp ifdetach

Detach a PPP interface.

535

ppp iflist

Display the PPP interfaces.

537

ppp ifscan

Scan a PPPoE interface for available Access Concentrator and Service names.

538

ppp rtadd

Add a route to the routing table when the PPP link comes up.

539

ppp rtdelete

Delete the route for a PPP link.

541

ppp relay flush

Remove all Ethernet interfaces from the PPP relay agent list and terminate all
sessions.

543

ppp relay ifadd

Add an Ethernet interface to the PPP relay list.

544

ppp relay ifconfig

Modify an ethernet interface from the PPP relay agent list.

545

ppp relay ifdelete

Delete an Ethernet interface from the PPP relay agent list.

546

ppp relay iflist

Display all Ethernet interfaces added to the PPP relay agent list.

547

ppp relay sesslist

Add an Ethernet interface to the PPP relay list.

548

Summary of Contents for SpeedTouch 716v5 (WL)




























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SpeedTouch 716v5 (WL)

Reviews:

Related manuals for SpeedTouch 716v5 (WL)

Brands by name

Popular brands

Speedtouch SpeedTouch 716v5 (WL), Cli Reference Manual

Search results

Summary of Contents for SpeedTouch 716v5 (WL)

Reviews:

Related manuals for SpeedTouch 716v5 (WL)

Brands by name

Popular brands