Speedtouch SpeedTouch 716v5 (WL), Cli Reference Manual

Page: 222 / 796

DSD Commands
E-DOC-CTC-20060414-0006 v1.0
200
dsd config
Display/modify the Differentiated Service Delivery (DSD) framework configuration.
SYNTAX:
where:
EXAMPLE:
dsd config [state = <{disabled | enabled | automatic}>]
state Choose between:
automatic (default):
By default (DSD config state is automatic), the DSD framework is not active, for
example no URL filtering or web site filtering is applied.
Only in case the state of
the default WAN IP interface goes down, DSD framework will be activated, for
example in case the PPP link goes down (implying HTTP intercept active).
enabled:
If DSD config state is enabled the DSD framework is
always active.
disabled
OPTIONAL
If you do not provide any parameters, the current configuration will be shown.
=>dsd config
State : automatic
=>