manualshive.com logo in svg

Speedtouch SpeedTouch 716v5 (WL), Cli Reference Manual

Share
Download
Speedtouch SpeedTouch 716v5 (WL) Cli Reference Manual Download Page 633

System Commands

E-DOC-CTC-20060414-0006 v1.0

611

System Commands

Introduction

This chapter describes the commands of the 

system

 command group.

Contents

This chapter covers the following commands:

system config 

Set/change the system configuration parameters.

612

system flush 

Flush the current system configuration.

614

system locale 

Set/get the regional settings.

615

system reboot 

Reboot the SpeedTouch™.

617

system reset 

Reset the SpeedTouch™ to its factory or ISP defaults and reboot the device.

618

system timedreboot 

Set or change a timed reboot for the SpeedTouch™.

619

system debug autosave 

Autosave debugging commands

620

system debug stats 

Show the SpeedTouch™ CPU and memory statistics.

621

system ra config 

Configure Remote management access parameters.

622

system rtc synchronize 

Do a SNTP update and synchronize the realtime clock.

623

system rtc settime 

Set/get date, time, timezone, daylight savings time, uptime.

624

Summary of Contents for SpeedTouch 716v5 (WL)





























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands