Speedtouch SpeedTouch 716v5 (WL), Cli Reference Manual

Page: 187 / 796

DHCP Commands
E-DOC-CTC-20060414-0006 v1.0
165
EXAMPLE:
primdns The IP address of the primary DNS server for the DHCP clients.
The default value of this parameter is 0 (not specified), which means that the IP
address of the DNS server will be communicated by the remote server as soon
as the PPP IPCP subnetmasking connection is established or that the
SpeedTouch™ acts as the LAN DNS server. OPTIONAL
secdns The IP address of the optional secondary DNS server for DHCP clients.
The default value of this parameter is 0 (not specified), which means that the
gateway IP address will be communicated by the remote server as soon as the
PPP IPCP subnetmasking connection is established. OPTIONAL
dnsmetric The DHCP server pool DNS route metric. OPTIONAL
primwins The IP address of the primary Windows Internet Naming Service (WINS) server
for DHCP clients. OPTIONAL
secwins The IP address of the secondary WINS server for DHCP clients. OPTIONAL
leasetime A number (of seconds).
Represents the time in seconds a client is allowed to use an address.
Note
Specifying 0 makes the lease permanent.
OPTIONAL
unnumbered Assign an IP address from this pool to the DHCP server (enabled) or not
(disabled).
Note
For dynamic pools only.
OPTIONAL
localgw Proxy for a virtual default gateway residing in same subnet of DHCP client
instead of the remote peer address. OPTIONAL
=>dhcp server pool list
Pool Start End Intf State
0 LAN_Private 10.0.0.1 10.0.0.254 eth0 USED
=>dhcp server pool config name=My_Pool poolstart=192.6.11.101
| poolend=192.6.11.254 netmask=255.255.255 gateway=192.6.11.100 leasetime=21600
=>dhcp server pool list
Pool Start End Intf State
0 LAN_Private 10.0.0.1 10.0.0.254 eth0 USED
1 My_Pool 192.6.11.101 192.6.11.254 eth0 USED
=>