manualshive.com logo in svg

Speedtouch SpeedTouch 716v5 (WL), Cli Reference Manual

Share
Download
Speedtouch SpeedTouch 716v5 (WL) Cli Reference Manual Download Page 419

IP Commands

E-DOC-CTC-20060414-0006 v1.0

397

ip ifconfig

Configure the parameters of an IP interface.

SYNTAX:

where:

ip ifconfig

intf = <string>
[mtu = <number{68-65535}>]
[status = <{down | up}>]
[hwaddr = <hardware-address>]
[group = <string> or number]
[linksensing = <{disabled | enabled}>]
[primary = <{disabled | enabled}>]
[mcastpromisc = <{disabled|enabled}>]

intf

The name of the IP interface to be configured.

REQUIRED

mtu

A number between 68 and 65535.
Represents the MTU (the maximum packet size (including IP header)) to be 
used on this interface.

Note

The default value depends on the connection and packet service for 
which the interface was created.

OPTIONAL

status

The administrative state of the interface.
Choose between:

down

up

.

OPTIONAL

hwaddr

The hardware address (for example the Ethernet MAC address) of this IP 
interface.

OPTIONAL

group

The group to which this interface belongs. Can be used for firewalling, for 
example.

OPTIONAL

linksensing

The IP interface's awareness of link state transitions.
The default is 

enabled

.

OPTIONAL

primary

Make the IP interface the primary interface (enabled) or not (disabled).
The default is 

disabled

.

OPTIONAL

mcastpromisc

Make the IP interface multicast promiscuous.
Choose between:

disabled

enabled

The default is 

disabled

.

OPTIONAL

Summary of Contents for SpeedTouch 716v5 (WL)





























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands