Speedtouch SpeedTouch 716v5 (WL), Cli Reference Manual

Page: 522 / 796

MLP Commands
E-DOC-CTC-20060414-0006 v1.0
500
mlp privilege list
Display the privileges.
SYNTAX:
where:
EXAMPLE:
mlp privilege list [name = <string>]
[type = <{access | service}>]
[verbose = <{minimal | medium | all}>]
name The name of the privilege to be listed.
Note
If not specified, all the privileges will be shown.
OPTIONAL
type Select the privilege type to be shown. Choose between:
access : only the access privileges will be shown
service : only the service privileges will be shown.
Note
If not specified, all the privilege types will be shown.
OPTIONAL
verbose Limit the output list. Choose between:
minimal
medium
all.
The default is minimal .
OPTIONAL
=>mlp privilege list type=service
Privilege (type) Description
----------------------------
anyservice (service) All service privileges granted
SP1 (service) Limited_Read
SP2 (service) detailed_Read
SP3 (service) Write_to_LAN
SP4 (service) Write_FWD_RT_normal_FW_cfgs
SP5 (service) cooperative_cfgs
SP6 (service) Remote Configurations
SP7 (service) Advanced sink & source FW
SP8 (service) Write_to_U_Connection
SP9 (service) Write_to_Local
SP10 (service) Simple_network_debugging
SP11 (service) Advance_Network_debugging
SP12 (service) User_admin
SP13 (service) MLP_Admin
SP14 (service) Backup & Restore
SP15 (service) CLI mngt Interface only
SP16 (service) CGI mngt Interface only
SP17 (service) FTP mngt Interface only
=>mlp privilege list name=SP5 verbose=all
SP5 (service) cooperative_cfgs
r_ipsec_norm, r_ipsec_adv, r_certificates, w_frwl_norm, w_frwl_adv,
w_ipsec, w_certificates
=>