Speedtouch SpeedTouch 716v5 (WL) Cli Reference Manual Download Page 325

Page: 325 / 796

Expr Commands

E-DOC-CTC-20060414-0006 v1.0

303

intfgroup

The IP interface group.
Choose between:

wan

local

lan

tunnel

dmz

guest.

Note

Only for expression type

intf

OPTIONAL

bridgeport

The bridge port number.

Note

Only for expression type

intf

OPTIONAL

tos

A number between 0 and 255.
Represents the ToS specification in the IP packet.

Note

The parameters

tos

precedence

and

dscp

are mutually exclusive.

OPTIONAL

precedence

The precedence in the IP packet (part of tos).
Select an IP precedence (see

“ IP Precedence” on page 754

) or, alternatively,

specify the number.

Note

The parameters

tos

precedence

and

dscp

are mutually exclusive.

OPTIONAL

dscp

The DSCP in the IP packet (part of tos).
Select a DSCP (see

“ Differentiated Services Code Point (DSCP)” on page 755

Note

The parameters

tos

precedence

and

dscp

are mutually exclusive.

OPTIONAL

proto

The protocol (name or number) expected in the IP packet.
Select one of the following protocols:

icmp

igmp

ipinip

tcp

udp

esp

ipcomp

or, alternatively, specify the protocol number.

OPTIONAL

srcport

The TCP/UDP port (or beginning of range) the packet is coming from.
Select one of the supported TCP/UDP port names (see

“ Supported TCP/UDP

Port Names” on page 749

) or, alternatively, specify the protocol number.

OPTIONAL

srcportend

The source TCP/UDP port range end (inclusive).
Select one of the supported TCP/UDP port names (see

“ Supported TCP/UDP

Port Names” on page 749

) or, alternatively, specify the protocol number.

OPTIONAL

dstport

The TCP/UDP port (or beginning of range) the packet is going to.
Select one of the supported TCP/UDP port names (see

“ Supported TCP/UDP

Port Names” on page 749

) or, alternatively, specify the protocol number.

OPTIONAL

dstportend

The destination TCP/UDP port range end (inclusive).
Select one of the supported TCP/UDP port names (see

“ Supported TCP/UDP

Port Names” on page 749

) or, alternatively, specify the protocol number.

OPTIONAL

icmptype

The ICMP type (name or number) of the packet.
Select one of the supported ICMP types (see

“ Supported ICMP Type Names”

on page 752

) or, alternatively, specify the type number.

OPTIONAL

icmpcode

A number between 0 and 15.
Represents the ICMP code (or beginning of range) of the packet.

OPTIONAL

icmpcodeend

A number between 0 and 15.
Represents the ICMP code range end (inclusive).

OPTIONAL

Summary of Contents for SpeedTouch 716v5 (WL)




























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SpeedTouch 716v5 (WL)

Reviews:

Related manuals for SpeedTouch 716v5 (WL)

Brands by name

Popular brands

Speedtouch SpeedTouch 716v5 (WL), Cli Reference Manual

Search results

Summary of Contents for SpeedTouch 716v5 (WL)

Reviews:

Related manuals for SpeedTouch 716v5 (WL)

Brands by name

Popular brands