Speedtouch SpeedTouch 716v5 (WL) Cli Reference Manual Download Page 217

Page: 217 / 796

DNS Commands

E-DOC-CTC-20060414-0006 v1.0

195

dns server route add

Adds a DNS forwarding route.

SYNTAX:

where:

EXAMPLE:

RELATED COMMANDS:

dns server route add

dns = <ip-address>
[src = <ip-address>]
[srcmask = <ip-mask(dotted or cidr)>]
[domain = <string>]
[metric = <number{0-100}>]
[intf = <string>]

dns

The IP address of a DNS server.

REQUIRED

src

The source IP address(es) using this remote DNS server.

Note

Supports IP/mask notation.

OPTIONAL

srcmask

The source IP address mask.

OPTIONAL

domain

The DNS domain label.

OPTIONAL

metric

A number between 0 and 100.
Represents the metric (weight factor) for this DNS route.
The lower the metric, the higher the weight.

OPTIONAL

intf

An interface name.
DNS queries will only be forwarded on the specified interface.

Note

In no interface is specified, DNS queries will be forwarded on all interfaces.

OPTIONAL

=>dns server route add dns=150.150.150.150 src=10.0.0.0/8 domain=myDNS intf=eth0

=>dns server route list

DNS Server

Source

Domain

Metric

Intf

State

150.150.150.150

10.0.0.0/8

myDNS

eth0

dns server route delete

Delete a DNS forwarding route.

dns server route list

List all the DNS forwarding routes.

Summary of Contents for SpeedTouch 716v5 (WL)




























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SpeedTouch 716v5 (WL)

Reviews:

Brands by name

Popular brands

Speedtouch SpeedTouch 716v5 (WL), Cli Reference Manual

Search results

Summary of Contents for SpeedTouch 716v5 (WL)

Reviews:

Brands by name

Popular brands