Speedtouch SpeedTouch 716v5 (WL), Cli Reference Manual

Page: 744 / 796

Wireless Commands
E-DOC-CTC-20060414-0006 v1.0
722
wireless secmode config
Configure/show the security mode.
SYNTAX:
where:
EXAMPLE:
wireless secmode config [mode = <{disable | wep | wpa-psk | wpa}>]
mode The security mode.
Choose between:
disable : no security
wep : Wired Equivalent Privacy (WEP)
wpa-psk : Wi-Fi Protected Access (WPA) - Pre-Shared Key (PSK)
wpa: Wi-Fi Protected Access (WPA).
The default is disable (in other words, by default, there is no security. This is to enable an
easy first use).
OPTIONAL
=>wireless secmode config
No security enabled, open authentication, no data encryption
=>wireless secmode config mode=wep
=>wireless secmode config
Security level WEP:
encryption key : 26FF871306
=>wireless secmode config mode=wpa-psk
=>wireless secmode config
Security level WPA-PSK:
preshared key : 26FF871306
encryption : TKIP
rekeying : every 0 seconds
=>