manualshive.com logo in svg

Speedtouch SpeedTouch 716v5 (WL), Cli Reference Manual

Share
Download
Speedtouch SpeedTouch 716v5 (WL) Cli Reference Manual Download Page 125

DHCP Commands

E-DOC-CTC-20060414-0006 v1.0

103

DHCP Commands

Introduction

This chapter describes the commands of the Dynamic Host Configuration Protocol (DHCP) command group.

Contents

This chapter covers the following commands:

dhcp client flush 

Delete all the DHCP leases.

105

dhcp client ifadd 

Create a DHCP client.

106

dhcp client ifattach 

Activate a DHCP client.

107

dhcp client ifconfig 

Configure a DHCP client.

108

dhcp client ifdelete 

Delete a DHCP client.

109

dhcp client ifdetach 

De-activate a DHCP client and releases its lease.

110

dhcp client iflist 

List all the DHCP leases attached to dynamic interfaces.

111

dhcp client ifrenew 

Renew the DHCP lease.

113

dhcp client debug clear 

Clear the DHCP client statistics.

115

dhcp client debug stats 

Print the DHCP client statistics.

116

dhcp client debug traceconfig 

Modify the DHCP client trace configuration.

117

dhcp client rqoptions add 

Add a DHCP Option Code to the Parameter Request List.

118

dhcp client rqoptions delete 

Delete a DHCP Option Code from the Parameter Request List.

119

dhcp client rqoptions list 

List all DHCP Option Codes in the Parameter Request List.

120

dhcp client rqoptions optionlist 

List all DHCP Option Codes that can be used in the Parameter 
Request List.

121

dhcp client txoptions add 

Add an option.

122

dhcp client txoptions delete 

Delete an option.

123

dhcp client txoptions list 

List all options.

124

dhcp client txoptions optionlist 

Lists all DHCP Option Codes that can be used.

125

dhcp relay add 

Add an entry to the DHCP forward list.

126

dhcp relay debug stats 

Show the DHCP relay statistics.

127

dhcp relay debug traceconfig 

Modify the DHCP relay trace configuration.

128

dhcp relay config 

Set the DHCP relay configuration settings.

129

dhcp relay delete 

Delete an entry from the DHCP forward list.

130

dhcp relay flush 

Flush the DHCP relay settings.

131

dhcp relay ifconfig 

Configure a DHCP relay interface.

132

dhcp relay iflist 

Show the configuration of the relay interfaces.

134

dhcp relay list 

List the DHCP forward list.

135

dhcp relay modify 

Modify an entry from the DHCP forward list.

136

dhcp relay ruleadd 

Add a selection rule to a DHCP forward entry.

137

Summary of Contents for SpeedTouch 716v5 (WL)





























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands