Speedtouch SpeedTouch 716v5 (WL), Cli Reference Manual

Page: 666 / 796

User Commands
E-DOC-CTC-20060414-0006 v1.0
644
user add
Add a user.
SYNTAX:
where:
EXAMPLE:
You can only add a user whose privileges are the same or lower than your own privileges.
user add name = <quoted string>
password = <password>
role = <string>
[hash2 = <string>]
[descr = <quoted string>]
[defuser = <{disabled | enabled}>]
[defremadmin = <{disabled | enabled}>]
[deflocadmin = <{disabled | enabled}>]
name The new user name.
Note
1. The maximum number of users is 10.
2. The maximum length is 32 characters.
REQUIRED
password The password.
Note
The maximum length is 32 characters.
REQUIRED
role The role name.
Tip
Use the command
:mlp role list
to obtain the role name
(see “ mlp role list” on page 507 for more information).
REQUIRED
hash2 The MD5 hash.
Note
The maximum length is 32 characters.
OPTIONAL
descr A user description.
Note
The maximum length is 63 characters.
OPTIONAL
defuser Set this user as the default user (enabled) or not (disabled).
Note
When the Web interface is accessed, the account of this user will be
used by default. The user will not need to authenticate himself with
user name or password.
The default is disabled .
OPTIONAL
defremadmin Set this user as the default remote administrator (enabled) or not (disabled).
The default is
disabled .
OPTIONAL
deflocadmin Set this user as the default local administrator (enabled) or not (disabled).
The default is
disabled .
OPTIONAL