Speedtouch SpeedTouch 716v5 (WL), Cli Reference Manual

Page: 339 / 796

Firewall Commands
E-DOC-CTC-20060414-0006 v1.0
317
firewall level add
Add a security level.
SYNTAX:
where:
RELATED COMMANDS:
firewall level add name = <string>
[index = <number>]
[readonly = <{disabled | enabled}>]
[udptrackmode = <{strict | loose}>]
[service = <{disabled | enabled}>]
[proxy = <{disabled|enabled}>]
[text = <quoted string>]
name The name of the security level to be added. REQUIRED
index The index of the security level.
Tip
Use the command
:firewall level list
to obtain a list of
indexes.
Note
If not specified, the new security level will be added at the bottom of
the list.
OPTIONAL
readonly Select whether the security level is readonly (enabled) or not (disabled).
The default is
enabled .
OPTIONAL
udptrackmode Select the UDP connection tracking mode.
Choose between:
strict : replies to a request from a client must be in a specific window to
the client.
loose : inbound packets are allowed on the port that was first used to start
the communication with the server (for example to allow a client of an
online game to obtin peer-to-peer information from other clients of that
same online game).
The default is strict .
OPTIONAL
proxy Enable or disable proxy system services for this security level. OPTIONAL
service Disable or enable host service definitions.
The default is
disabled .
OPTIONAL
text Description of the security level.
Note
The maximum length is 39 characters.
OPTIONAL
firewall level delete Delete a security level.
firewall level list List all the security levels.