SpectraLink 84 Series User Manual Download Page 78 | Manualshive

Page: 78 / 81

background image

78

S P E C T R A L I N K 8 4 - S E R I E S U S E R G U I D E

Wireless Telephones

Please read the following text carefully for important safety information.

Warning: Magnetic earpiece

The earpiece may retain magnetic objects.

Caution: Authority to operate this equipment

Changes or modifications to this equipment that are not approved by Spectralink may cause this equipment to fail
to comply with part 15 of the FCC rules, voiding the user’s authority to operate this equipment.

Caution: Not user serviceable

Spectralink products contain no user-serviceable parts inside. Refer servicing to qualified service personnel.

Warning: Medical equipment interference

Spectralink recommends that standard acceptance procedures be followed prior to operating this equipment in
proximity of life-support systems.

Operational Warnings

Certain operational environments are potentially hazardous. Please read the following text carefully to ensure that
you understand the handset’s operating conditions.

Potentially Explosive Atmospheres

Do not take your handset into any area with a potentially explosive atmosphere. Do not remove, install, or charge
batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in
bodily injury or even death.

Warning: Explosive Atmospheres

Avoid areas with potentially explosive atmospheres include fueling areas such as lower decks on boats, fuel, or
chemical transfer or storage facilities, areas where the air contains chemicals or particles such as grain, dust, or
metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas
with potentially explosive atmospheres are often marked with signs, but not always.

«
...
76
77
78
79
80
...
»

Summary of Contents for 84 Series


















































































Reviews:

No comments

Related manuals for 84 Series

-295861 - Corded Desktop CID Itad

Brand: GE Pages: 44

Brand: 5G HUB Pages: 16

Brand: Dakota Alert Pages: 2

Brand: Daisy Pages: 16

Brand: DAINCUBE Pages: 38

Brand: Waters Pages: 21

Brand: ICS Pages: 85

Brand: SAGEMCOM Pages: 37

Brand: Uniden Pages: 32

OpenScape Desk Phone CP400T

Brand: Unify Pages: 130

OpenScape Desk Phone CP100

Brand: Unify Pages: 36

Brand: Uniden Pages: 6

Brand: CEECO Pages: 12

Brand: VTech Pages: 2

Brand: Gigaset Pages: 86

Brand: AT&T Pages: 35

Brand: Alcatel Pages: 46

Brand: Feider Machines Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands