SpectraLink 84 Series User Manual Download Page 57 | Manualshive

Page: 57 / 81

background image

57

S P E C T R A L I N K 8 4 - S E R I E S U S E R G U I D E

you don’t enable your handset to save search results, a blank search screen will display each time you open the
Corporate Directory.

To enable your handset to save Corporate Directory search results:

1.

Navigate to

Settings > Basic Settings > Preferences > Corporate Directory > View Persistency

.

2.

Scroll to

Enabled

, and press

OK

. Your handset will now save corporate directory search results in the

Corporate Directory search screen.

3.

Press the

Home

key.

Chapter 7: Pairing and Connecting a Bluetooth Headset

This section shows you how to pair and connect your Bluetooth headset.

Note: Bluetooth compatibility

Your 84-Series handset has been tested for compatibility with Bluetooth v2.1 headsets. However, Spectralink does
not recommend using your headset while the 2.4 GHz band is enabled. In this case, the Bluetooth and WLAN
network with both use the same 2.4GHz frequency range. Bluetooth technology and 802.11b/g/n technology are
not compatible. Bluetooth device behavior may also vary slightly between phone models. The following instructions
are intended as a guide, and may not specifically apply to your Bluetooth device. You can usually find instructions
on the Bluetooth headset manufacturer’s Web site.

User Tip: Pairing a Bluetooth device

To avoid conflicts with other devices, pair your Bluetooth device in an area that is free of other Bluetooth activity.

Caution: Out of range conditions

If the Bluetooth headset moves out of range of the handset and loses its connection, it may beep a warning. When
it moves back into range, the Bluetooth headset may or may not reconnect with the handset. This behavior varies
with Bluetooth headset model.

«
...
55
56
57
58
59
...
»

Summary of Contents for 84 Series


















































































Reviews:

No comments

Related manuals for 84 Series

Brand: Yealink Pages: 2

Brand: Trotec Pages: 20

Linx 700-0120-501

Brand: ooma Pages: 10

Brand: Uniden Pages: 28

Brand: Bang & Olufsen Pages: 76

Brand: Aastra Pages: 62

Brand: Trident Voice Pages: 2

MD 491R - 174; 2.4GHz CORDED/CORDLESS PHONE SYSTEM

Brand: Motorola Pages: 64

Brand: Motorola Pages: 22

Brand: Motorola Pages: 42

Brand: Motorola Pages: 68

Brand: Motorola Pages: 21

Brand: Motorola Pages: 64

Brand: Motorola Pages: 73

Brand: Motorola Pages: 21

MA560 - MA 560 Cordless Phone

Brand: Motorola Pages: 76

L301 - DECT 6.0 Cordless Phone

Brand: Motorola Pages: 43

Brand: Motorola Pages: 70

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands