Specac Atlas Power 15Ton, User Manual, Page: 9 / 84

Atlas™ Autotouch 8T, 15T and 25T Hydraulic Presses
7
2. Unpacking, Checking and Installation
Beware! The Atlas™ Autotouch 8T/15T/25T press is very heavy
and care must be taken to transport it correctly. Please
keep the press packing materials for future transportation
if necessary by reversing the following procedure. This
will protect you and the press from accident or injury.
Remove the outer wooden box casing and the top layer packing card
(where the instruction manual was located) to lift clear of the base
pallet. There are 2 crosshead screws on 2 sides at the base of the box
that must be unscrewed to separate the box from the base pallet.
The Atlas™ Autotouch 8T/15T/25T press is on a base packing piece
which also holds a lead screw assembly and special parts for a lifting
“eye bolt” assembly. An appropriate mains lead (or leads) will also be
located in this area. Cut the straps that hold these items in place. You
will need to assemble the lifting eye bolt pieces through the press
(where the lead screw assembly is positioned for operation) to lift the
press clear from the pallet and its transportation packing.
Lead Screw Assembly
Lifting Eye Bolt
Assembly