Atlas™ Autotouch 8T, 15T and 25T Hydraulic Presses
65
press to the screen display (
C
) environment with no changes to
the program. Pressing the (
Exit
) box at this stage returns the
press to the (
Dir
) Display Screen (
A
) environment
.
Press the
Fast
,
Medium
or
Slow Release Load Rate
box to set for
the segment (
S#
) detail. The following Display Screen will be shown
for the load value to set against the particular
Release Load Rate
function symbol selected.
Display Screen after Fast, Medium or Slow
Release Load Rate Box Pressed
For our example program (
P4
), segment (
S3
) is illuminated to change
the
Fast Release Load Rate
function from its current 7.0 tons setting
to a
Medium Release Load Rate
function to 5 tons. However, in this
instance of a program creation and sequence of events, the previous
load holding setting has been at 15 tons for the “
Pump up to
” load
step at segment (
S1
) and
maintained
for 0.3 minutes at the segment
(
S2
) step. Therefore, in this example for use of the Autotouch 25T
press, the maximum load that can be set for a
Load Release Rate
to
drop to is 15 tons, hence the load range presented by the slide cursor
on the gradient scale is from the minimum 0.0 tons to the maximum of
15 tons dictated by the previous segment (
S1
) setting.
Change the
Release Load Rate
load value level to apply, accordingly
indicated at the slide cursor position, by touching and pressing the left
side (lower load limit) green box to reduce the tonnage load value or
Summary of Contents for Atlas Power 15Ton
