Specac Atlas Power 15Ton, User Manual

Page: 25 / 84

Atlas™ Autotouch 8T, 15T and 25T Hydraulic Presses
23
Exit Symbol - Exit from a particular Display Screen
operating environment back to the Main Operation
Screen. (
MOS ).
Add Symbol - To add a segment step in a stored
program under the Edit operation environment.
Delete Symbol - To delete a segment step in a
stored program under the Edit operation environment.
ok Symbol - Can re-start the press for application of
a load from this point when illuminated, although the
piston may not have fully retracted.
OK Symbol - The ok changes to OK after a time
period of 30 seconds. Can restart the press for
application of a load from this point when illuminated,
and time has been allowed for greater retraction of
the piston to its start position.
Run Symbol - Illuminates when a program sequence
is running.
End Stop Symbol – The End Stop step as the final
segment in a program.
Step Back Symbol – Used to step back from
inclusion or change of a Fast, Medium or Slow Load
Release Rate function in a program segment.
Cross Symbol – Used to reject any changes made in
a programming sequence.
Tick Symbol – Used to save any changes made in a
programming sequence.