Specac Atlas Power 15Ton, User Manual

Page: 16 / 84

User Manual
14
•
Do not exceed a load limit of 8 tons for the Atlas™ Autotouch 8T
press, 15 tons for the Atlas™ Autotouch 15T or 25 tons for the
Atlas™ Autotouch 25T press.
•
Do not attempt to press potentially combustible materials or materials
with a low flash point temperature.
•
Do not operate the press in very hot or very cold environments.
Ambient temperature range allowable is 5°C to 40°C.
•
Do not operate the press in WET, DAMP or HUMID environments.
(Allow time for condensation to evaporate before operation – if the
press has been stored in cold conditions).
•
Do not operate the press if it shows any visible damage. The press
may have been dropped in transit or damaged in use. Seek advice.
•
Do not continue operating the press if it fails to perform the intended
measurement. Seek advice.
Repair or Maintenance Safety
The Atlas™ Autotouch 8T/15T/25T press shall be disconnected from
all voltage sources before it is opened for any adjustment, replacement
of parts, maintenance or repair.
Any adjustment, maintenance or repair of the opened apparatus under
voltage should be avoided as far as possible and if inevitable, should
be carried out
only by a skilled person who is aware of the hazards
involved. Capacitors inside the apparatus may still be charged even if
the press has been disconnected from all voltage sources.