Atlas™ Autotouch 8T, 15T and 25T Hydraulic Presses
55
The last program that was stored and used is presented to the (
Dir
)
screen. From the example of (
Dir
) screen display (
A
) for (
P4
) being
loaded, program number 4 is shown displayed for 7 (seven) segments
(
S#’s
) that have been used in this program in the blue background
area of the display screen.
To step through the Directory to see the status for the other programs
(
P#’s
) that have been created for use, either the (
P-
) or (
P+
) green
background boxes can be pressed. Pressing (
P-
), steps back a (
P#
)
and pressing (
P+
) steps forward a (
P#
). The (
P#
) sequence scrolls
numerically from Z, 1, 2, 3, 4, 5 and 6 in this order. (Z is for
PZ
). If (
P6
)
is accessed and displayed and then (
P+
) is pressed, the sequence
scrolls around to start at (
PZ
) again.
If a particular program (
P#
) that has been created and is displayed
from scrolling through the Directory matches the program steps and
sequence for a load application to be used, then pressing of the (
Exit
)
box will return to the (
MOS
) and load the selected (
P#
) to use.
However, if from scrolling through the Directory a particular (
P#
)
program sequence is close to, but does not exactly match the
requirements for application, the program can be edited (changed) by
pressing the (
Edit
) box. Pressing the (
Edit
) box at this stage accesses
the Display Screen (
B
) environment (as shown below), for stepping on
to the (
Edit
) functions. (See Editing Screen page 56.) The example
below, for (
P4
), has been used to show for a typical Display Screen (
B
)
environment and the program sequence that may be edited.
Summary of Contents for Atlas Power 15Ton
