User Manual
56
5) Editing Screen (
Edit
)
Editing of a program for a segment (
S#
) addition, deletion or change of
function can only be achieved for programs (
P1
to
P6
) when loaded for
potential operation and displayed as accessed through to the (
Edit
)
Display Screen (
B
) environment. (See example of screen display (
B
)
for program (
P4
) on page 55). The (
Edit
) Display Screen (
C
)
environment is acessed directly from the (
MOS
) environment from
pressing the (
Dir
) box when any program from (
P1
to
P6
) is loaded
and then pressing the (
Edit
) box in the screen display (
B
) environment.
(See page 57).
Note:
If a (
P#
) from (
P1
to
P6
) to be edited is different to that which is
currently loaded and shown in the (
Dir
) Display Screen (
A
)
environment, (see page 47), the appropriate (
P#
) should be
changed by pressing either the (
P-
) or (
P+
) box to be displayed
prior to pressing the (
Edit
) box to gain access to the Display
Screen (
B
) environment.
Editing Functions
From the screen display (
B
) environment with the correct (
P#
) loaded
to be edited, a particular segment (
S#
) must first be highlighted to
change. The example program details for (
P4
) have been used to
explain the following editing steps.
Pressing (S-) or (S+) Boxes
From the Display Screen (
B
) environment with (
P4
) loaded to edit (as
shown on page 55), (
S1
) is illuminated for the initial step of applying 15
tons as the “
Pump up to load
” in the program sequence. Pressing the
(
S+
) box for successive, individual pushes advances the white
illuminated segment (
S#
) of the blue coloured program segments one
step at a time. For our example the (
S+
) box has been pressed three
times from the (
S1
) segment illuminated condition to illuminate (
S4
);
the step to apply a 20 tons as the “
Pump up to load
” in the program
sequence. It is at this point when a particular segment (
S#
) has been
illuminated that a choice to (
Add
) a new segment, (
Del
) the illuminated
segment or (
Edit
) for the illuminated segment details, can be made.
Summary of Contents for Atlas Power 15Ton
