User Manual
48
the (
MOS
). In this instance for Screen Display (
A
) the (
Edit
) and
(
Pgm
) boxes
are active
when touched to step to another
environment when the (
P1
to
P6
) program details are displayed.
Pressing (
Edit
) takes you to the (
Edit
) environment (See page
56).
Pressing (
Pgm
) steps to Display Screen (
B
), as seen on
page 46, for the same loaded (
P#
), similar to the (
Pgm
) button
being pressed
as the first step directly
from the (
MOS
).
However, the (
Pgm
) box can be touched to access and step
through to the next “free” program register from programs (
P1
) to
(
P6
), but pressing of the (
Pgm
) button defaults to the Display
Screen (
B
) environment if all program registers from (
P1
) to
(
P6
) are already allocated and filled with details for a user
custom created program that could be selected to run.
From the (
MOS
) with the (
P4
) example program loaded, if the (
Opt
)
symbol in the green box is touched and pressed, the (
Opt
) Display
Screen environment is accessed and shown as follows:-
Note:
From the step sequence from (
MOS
) to the (
Opt
)
Display
Screen, only the green tick (accept) and red cross (reject)
symbol boxes are presented to touch and to step to another
environment. Pressing either of these symbol boxes act as an
“
Exit
” from the (
Opt
) Display Screen directly back to the (
MOS
).
(Opt) Display Screen Accessed from (MOS) with (P4) program
As a general note the (
Opt
) Display Screen is the same for ANY
program that is loaded (
PZ
to
P6
) when the (
Opt
) button is pressed.
Summary of Contents for Atlas Power 15Ton
