User Manual
36
The Pressing Area
The Atlas™ Autotouch 8T/15T/25T press has a sample compartment
size that allows for use of the entire range of Specac evacuable pellet
dies. The maximum distance between the pressing faces is 155mm
with a fully raised lead screw pressing anvil face (
10
) and fully
retracted piston pressing face (
7
) and the minimum distance is 40mm
with a fully lowered lead screw pressing anvil face (
10
) and fully
retracted piston pressing face (
7
). The maximum diameter of a sample
that can be accommodated is 220mm.
Warning!
Any “Pump up to” load to be set and applied
must not exceed the maximum load capability of the
die being used.
8
10
6
7
5
Summary of Contents for Atlas Power 15Ton
