Specac Atlas Power 15Ton, User Manual, Page: 10 / 84

User Manual
8
Before the eye bolt can be put in place the internal packing in the press
has to be removed. Cut the tape at the top of the plastic bag and
around the base of the bag and lift clear of the press. You will see that
there is further protective packing within the pressing area of the press
behind the safety guard. The safety guard is in the down position and
held in place by sticky tape to the base of the press on the outside.
Remove the sticky tape and lift up the safety guard via the handle to
gain access to the internal pressing area. Remove the packing inside.
Now take the lifting eye bolt pieces and assemble through the top of
the press as shown in the diagram.
Note: Ensure that the pieces are firmly bolted together prior to
moving/lifting the press.
Lifting Eye Bolt
Assembly Parts
Separated