Southwestern Industries TRAK 2OP M11, Safety, Installation, Maintenance, Service And Parts List

Page: 4 / 236

1
Southwestern Industries, Inc.
TRAK

2
OP
M11 Installation, Maintenance, Service, & Part List Manual
1.0 Safety
The safe operation of the 2 OP Mill depends on its proper use and the precautions taken by each operator.
 Read and study this manual and the 2 OP Programming, Operating, and Care Manual. Be certain
every operator understands the operation and safety requirements of this machine
before its use.
 Never run the machine with enclosure doors open
 Always wear safety glasses and safety shoes.
 Always stop the spindle and check to ensure the CNC control is in the stop mode before changing or
adjusting the tool or workpiece.

Never wear gloves, rings, watches, long sleeves, neckties, jewelry, or other loose items when
operating or around the machine.
 Use adequate point of operation safeguarding. It is the responsibility of the employer to provide and
ensure point of operation safeguarding per OSHA 1910.212 - Machining centers.
1.1 Safety Publications
Refer to and study the following publications for assistance in enhancing the safe use of this machine.
Safety Requirements for Machining Centers and Automatic, Numerically Controlled Milling,
Drilling and Boring Machines (ANSI B11.22-2002) (R2007) & (ANSI B11.23-2002 (R2007). Available from
The American National Standards Institute, 1819 L Street N.W., Washington D.C. 20036
Concepts And Techniques Of Machine Safeguarding (OSHA Publication Number 3067). Available from
The Publication Office - O.S.H.A., U.S. Department of Labor, 200 Constitution Avenue, NW, Washington, DC
0210.
1.2 Danger, Warning, Caution, and Note Labels & Notices As Used
In This Manual
DANGER - Immediate hazards that will result in severe personal injury or death. Danger labels on the
machine are red in color.
WARNING - Hazards or unsafe practices that
could result in severe personal injury and/or damage to the
equipment. Warning labels on the machine are orange in color.
CAUTION - Hazards or unsafe practices, which
could result in minor personal injury or equipment/product
damage. Caution labels on the machine are yellow in color.
NOTICE - Call attention to specific issues requiring special attention or understanding.