Southwestern Industries TRAK 2OP M11, Safety, Installation, Maintenance, Service And Parts List

Page: 19 / 236

16
Southwestern Industries, Inc.
TRAK

2
OP
M11 Installation, Maintenance, Service, & Part List Manual
Figure 2.4.17a – Transformer used on 220 volt machines
Figure 2.4.17b shows the terminal blocks for a 440 volt machine where you can switch the
wiring. For example, the machine is most likely shipped from the factory with the wire in the 440
volt terminal. This wire needs to be moved to the 400 or 480 terminal if the input voltage to the
machine measures this amount. The 380 volt terminal will most likely not be used on USA
machines.
Figure 2.4.17b – Transformer used on 440 volt machines
Please see drawing 27648-2 at the rear of the manual for more information.