manualshive.com logo in svg

Sound Devices 702T, User Manual, Page: 82 / 84

Share
Download
Sound Devices 702T User Manual Download Page 82

702T User Guide and Technical Information 

80

v. 2.67 

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Warranty & Service 

Sound Devices, LLC warrants the 702T and 702T Portable Audio Recorders against defects in materi-

als and workmanship for a period of TWO (2) years from date of original retail purchase. This is 

a non-transferable warranty that extends only to the original purchaser. Sound Devices, LLC will 

repair or replace the product at its discretion at no charge. Warranty claims due to severe service con-

ditions will be addressed on an individual basis. THE WARRANTY AND REMEDIES SET FORTH 

ABOVE ARE EXCLUSIVE. SOUND DEVICES, LLC DISCLAIMS ALL OTHER WARRANTIES, 

EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 

A PARTICULAR PURPOSE. SOUND DEVICES, LLC IS NOT RESPONSIBLE FOR SPECIAL, INCI-

DENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF WARRANTY OR 

UNDER ANY OTHER LEGAL THEORY. Because some jurisdictions do not permit the exclusion or 

limitations set forth above, they may not apply in all cases. 

For all service, including warranty repair, please 

contact Sound Devices for an RMA

 (return mer-

chandise authorization) before sending your unit in for repair. Product returned without an RMA 

number may experience delays in repair. When sending a unit for repair, 

please do not include accesso-

ries, including CF cards, batteries, power supplies, carry cases, cables, or adapters unless instructed by Sound 
Devices

. 

Sound Devices, LLC  

Service Repair RMA #XXXXX  

300 Wengel Drive  

Reedsburg, WI 53959 USA  

telephone: (608) 524-0625 

Technical Support / Bug Reports 

For technical support and bug reporting on all Sound Devices products contact: 

Sound Devices, LLC  

E-mail:  [email protected]  

web: www.sounddevices.com/contact_support.htm  

Telephone:  +1 (608) 524-0625 / Toll-Free in the U.S.A.:  (800) 505-0625  

Fax:  +1 (608) 524-0655 

Sound Devices hosts a discussion forum for 7-Series recorders. The URL is: 

 http://forums.sounddevices.com 

Sound Devices cannot guarantee that a given computer, software, or operating system configura-

tion can be used satisfactorily with the 702T based exclusively on the fact that it meets our minimum 

system requirements. 

Please check with your software editing application to make certain that it is compatible with the file 

type selected. 

Summary of Contents for 702T





















































































Reviews:

No comments