Sound Devices 702T User Manual Download Page 64

Page: 64 / 84

702T User Guide and Technical Information

v. 2.67

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Logic Inputs

Configured as a switch-closure input, a pin can be connected to a switch that a user has wired to

assigned contact. This switch can then trigger the 702T to begin recording. Other functions can be

assigned as well from the Setup Menu. The switch-closure on a given pin of the CL-1 can be thought

of as just another key on the keyboard. Anything that can be assigned to a key can also be assigned

to a switch.

To configure a pin as an input, navigate to

EXT KEYBOARD ASSIGN

in the Setup Menu. Select a new

SHORTCUT

number, then locate the Login inputs amongst the assignable keys. Choosing

LOGIC IN 1

would correspond to pin 1 on the CL-1,

LOGIC IN 2

would correspond to pin 2 on the CL-1, and so

on. After a Logic input is chosen assign the desired action that the Logic input will control.

Logic Outputs

Configured as a switch-closure output, the CL-1 can drive LEDs, relays, or any other sort of device

which will accept a TTL-level or similar input. For example, the CL-1 can drive a big red LED con-

nected via a series resistor between the +5V output and a switch-closure output and light up when-

ever the recorder is put into record mode.

To configure a pin as an output, go to

CL-1: LOGIC OUT ASSIGN

in the Setup Menu. The Logic

Pin number is on the left hand side (“00”, “01”, etc). Each of these pins can be assigned to un-

defined, Stop, Play, Record, or Pause. Note that if a pin is assigned to be both an input (via the

EXT KEYBOARD ASSIGN

Setup Menu) and an output (via the

CL-1: LOGIC OUT ASSIGN

Setup

Menu), the pin will automatically default to an output.

Setup Presets

Presets are useful shortcuts to speed setting the numerous parameters available in the Setup Menu.

The 702T has four built-in presets and one user preset per media.

Built-In Presets

The 702T is shipped from the factory with the factory preset applied. Its settings are listed below.

Three additional presets, film, reporter, and music presets allow for quick setup of typical param-

eters for the defined application. Presets are applied by entering the Setup Menu and selecting the

preset. All previous settings are lost when a preset is applied.

702T Presets

Factory Preset

Film

Preset

Reporter

Preset

Music

Preset

Rec: FireWire Connection

External Drive

Computer Connect

Rec: Sampling rate

48 kHz

44.1 kHz

Rec: Bit Depth

24 bits

16 bits

Rec: File Type

.wav poly

.wav mono

.wav poly

Rec: Media Select

EXHDD and CF

CF only

Rec: Scene Name/Number

None

Rec: Track Names

Track A: Track A
Track B: Track B

Rec: Take Name/Number

T 01

Rec: Take Reset Mode

When Scene is changed

Rec: Pre-Roll Time

2 Sec

Rec: Dither

Off

Summary of Contents for 702T





















































































Search results

Summary of Contents for 702T

Reviews:

Sound Devices 702T, User Manual, Page: 64 / 84

Search results

Summary of Contents for 702T

Reviews: