Sound Devices 702T User Manual Download Page 72

Page: 72 / 84

702T User Guide and Technical Information

v. 2.67

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Setup Name

Setup Description

Setup Options

HP: Monitor Modes

Select the sequence of the modes that appear

in the Headphone Source Display on the LCD.

Up to 20 source selections can be entered in any

order. See headphone monitor section in guide

for adjustment and Favorite Mode below for list of

headphone selections.

HP: Favorite Mode

Selects the audio source monitored when the

Rotary Switch is pressed during recording or

playback.

Inputs 1,2

Tracks A,B

Monitor A,B

Input 1,1

Input 2,2

Track A,A

Track B,B

Monitor A,A

Monitor B,B

Inputs 1,2 (MS)

Tracks A,B (MS)

Inputs 1+2,1+2

Tracks A+B,A+B

HP: Playback Mode

Selects the audio source sent to headphones

upon playback.

• No change

• Same as options listed above

HP: Warning Bell Level

Set the output level of the multi-function warn-

ing bell.

Off,

60 to –12 dBFS in 1 dB steps

HP: Rec/Stop Bell

Alerts the user with one beep at the start of

recording and two beeps when the recording

is stopped

• Disabled

• Enabled

Tone: Level

Set the output level of the reference tone

40 to 0 dBFS in 1 dB steps

Tone: Frequency

Allows the user to set the frequency of the

reference tone oscillator

100–10,000 Hz in 10 Hz steps

Tone: Mode

Select the destination of the reference tone or

to disables it completely

• disabled

• to record tracks only

• to outputs only

• to record tracks and outputs

Tone: Record Lock

Sets the Tone key to be either available or

locked while in Record Mode.

• Enabled While Recording

• Locked While Recording

Drive: Speed Tests

Performs a speed test on the CompactFlash

media installed and external drives. Data

transfer speed is measured in KB/s.

Caution: Drive test will disable processing and mute

outputs for duration of test. Outputs will not return

until test is exited.

CF: Space

Shows the drive file system, total size, and

space remaining on connected CompactFlash

medium.

CF: Erase / Format

Formats installed CompactFlash medium
Caution, while various PC utilities are able to

recover files from re-formatted drives, once

formatted, old audio data is not accessible by

the 702T.

CF: Empty Trash

Allows user to delete files previously sent to

the trash as well as false takes.

• Empty Trash

• Empty False Takes

• Empty both

EXHDD: Space

Shows the drive file system, total size, and

space remaining on connected Compact Flash

medium.

EXHDD: Erase / Format

Formats attached FireWire storage volume
Caution, while various PC utilities are able to

recover files from re-formatted drives, once

formatted, old audio data is not accessible by

the 702T.

Summary of Contents for 702T





















































































Search results

Summary of Contents for 702T

Reviews:

Sound Devices 702T, User Manual, Page: 72 / 84

Search results

Summary of Contents for 702T

Reviews: