manualshive.com logo in svg

Sound Devices 702T, User Manual, Page: 61 / 84

Share
Download
Sound Devices 702T User Manual Download Page 61

702T User Guide and Technical Information

59

CL-1 Remote Control and Keyboard Interface 

The CL-1 Remote Control and Keyboard Interface is an available, optional hardware accessory to 

interface the recorder with PS/2 compliant computer keyboards and enables external devices to 

control the 702T. When using the CL-1, front panel controls and menu selections on the 702T can be 

mapped to keyboard shortcuts, allowing for full keyboard control of the recorder. Additionally the 

CL-1 has contact closures for programming remote inputs or outputs. These are commonly used for 

machine control and “remote rolling” using a mixing console with transport controls. 

Connecting the CL-1 

1.  Connect the included C. Link cable to the 702T’s C. Link Input connector. 

2.   Connect the opposite end of the C. Link cable to the CL-1’s C. Link connector. 

3.   Connect a PS/2 keyboard to the PS/2 connector on the CL-1. 

4.  Connect switches between assigned pins 1-6, pin-7 (ground), and pin-8  (+5V) on the CL-1. (

See 

Logic 

Inputs and Outputs

)

The C. Link port on the 702T provides power for CL-1 operation. 

Keyboard Assignments 

Standard keyboard shortcuts have been pre-assigned and are listed below.

Menu Keys

Shortcut Key

Function

Space Bar

Enters Playback Mode 

Pauses the take in Playback Mode

Escape

Cancel – Exits without saving in all menus

Enter

Ok – Exits with saving in all menus (Check Mark or Edit)

Up Arrow

Mirrors the LCD Up Arrow in all menus

Down Arrow

Mirrors the LCD Down Arrow in all menus

Left Arrow

Mirrors the LCD RWD Arrow in all menus 

Custom Route User Interface – Un-assign Route 

Time Menu – Moves to previous field

Right Arrow

Mirrors the LCD FFWD Arrow in all menus 

Custom Route User Interface – Assign Route. 

InRoute User Interface – Edit if on ‘Custom Route’ 

File User Interface – Selects Options for Folders/Files when displayed 

Shortcut Edit User Interface – Edit shortcut if on shortcut number 

Scene/Track Lists – Edits (Same as hitting Play button) 

Time Menu – Moves to next field.

Menu

Enters the Setup Menu

CTRL + Up Arrow

Setup User Interface Menu - Moves to the previous category

CTRL + Down Arrow

Setup User Interface Menu - Moves to the next category

Page Up

Setup User Interface Menu - Moves to the previous category or marker

Page Down

Setup User Interface Menu - Moves to the next category or marker 

Shortcut Edit User Interface Menu – Same as Enter

Home

Setup User Interface Menu - Moves to the top of the list. 

File User Interface – Moves to the top of the list 

Shortcut Edit User Interface – Goes to first shortcut number or Hot Key 

String User Interface – Goes to the beginning of the string

Summary of Contents for 702T





















































































Reviews:

No comments