manualshive.com logo in svg

Sound Devices 702T, User Manual, Page: 29 / 84

Share
Download
Sound Devices 702T User Manual Download Page 29

702T User Guide and Technical Information

27

Meter Ballistics 

The output meter can be set to display any of five types of meter ballistics:  VU, Peak, Peak-hold, 

a combination of VU and Peak, and a combination of VU with Peak-hold. The meter ballistics are 

selected in the Setup Menu. 

 

VU - (Volume Units) 

Ballistics correspond closely to how the human ear perceives loudness and provides a good visual 

indication of how loud a signal will be. In VU mode, the attack and decay of the meter signal is 

300 mS. While giving a very good visual indication of perceived loudness, VU meters gives poor 

information on actual signal peaks and are virtually useless for tracking to the 702T. In VU mode, the 

front panel meter labeling is in volume units. 

Peak 

Peak-reading ballistics correspond to actual signal maximums, but don’t necessarily correspond to 

perceived signal loudness. A peak meter has a near-instantaneous attack to display maximum signal 

amplitude and a slow decay to allow the user to see them. Peak metering is essential for digital re-

cording, since signal overload can cause immediate distortion. The peak meters front panel markings 

are calibrated in dBFS, decibels relative to full-scale digital signal. 

Peak Hold 

Essentially the same as Peak metering where the peak level indication will hold for the peak level 

indication for several seconds. Peak-hold indicators are useful for metering in applications when an 

overload condition is unacceptable. 

Peak/VU 

The meter can simultaneously display VU and Peak level information. In this mode the perceived 

loudness (VU) is displayed on a bar graph, and the Peak signal on a dot above the VU. With this 

combination the user gets the best of both VU and Peak metering by seeing both the “loudness” of 

the signal and the peaks at the same time. Peak/VU is the factory default. 

Peak Hold/VU 

Similar to VU/Peak mode, this mode holds the peak level indication for several seconds before 

releasing. Peak Hold indicators are useful for metering in applications when an overload condition is 

unacceptable. 

Peak LEDs 

input signal present LEDs 

input peak LEDs 

headphone peak LED 

 

In addition to the main LED output meter, peak LEDs show input peaks, track peaks, and head-

phone peaks. 

Summary of Contents for 702T





















































































Reviews:

No comments