Sound Devices 702T User Manual Download Page 67

Page: 67 / 84

702T User Guide and Technical Information

Setup Menu

The chart below describes the available setting for the 702T.

Setup Name

Setup Description

Setup Options

Quick Setup

Allows the user to quickly apply default menu

setups and save/retrieve user setups to disk

or CF.

• Load Factory Settings

- restores the factory default settings
• Load Film Settings

- applies typical setups for film production
• Load Reporter Settings

- applies typical setups for voice recording
• Load Music Settings

- applies typical setups for music recording
• Load User from CF

- applies settings saved by user to CF
• Save User to CF

- saves present state to file on CF

FireWire: Connection

Activates FireWire drive mode.

• Computer/Connect (STOP+HDD buttons)

• External Drive

Rec: Sample Rate

Sets the audio sampling frequency of the 702T

• 32 kHz
• 44.1 kHz
• 47.952 kHz
• 47.952k F
• 48 kHz
• 48.048 kHz
• 48.048k F

• 88.2 kHz
• 96 kHz
• 96.096 kHz
• 96.096 k F
• 176.4 kHz
• 192 kHz

Rec: Bit Depth

Sets the bit depth of the 702T recordings.

• 16 bit,

• 24 bit

Rec: File Type

Selects the file format (type) recorded to the

selected medium.

• .wav poly
• .wav mono
• .flac
• .MP3 32 kb/s
• .MP3 64 kb/s
• .MP3 96 kb/s
• .MP3 128 kb/s
• .MP3 160 kb/s
• .MP3 192 kb/s
• .MP3 256 kb/s

• .MP3 320 kb/s
• .MP2 64 kb/s
• .MP2 96 kb/s
• .MP2 128 kb/s
• .MP2 160 kb/s
• .MP2 192 kb/s
• .MP2 256 kb/s
• .MP2 320 kb/s
• .MP2 384 kb/s

Rec: Media Select

Selects the storage media used for recording.

Media is selectable even if it is not present.

• CF Only

• EXHDD Only

• EXHDD and CF

Rec: Scene Name/Number

User-defined, alpha-numeric file scene names

can be pre-set and selected from a list. Scene

name lists can be saved to hard drive.

<up to 9 alpha-numeric characters can be entered for

the scene name>
Scene name can also be left blank

Rec: Track Names

used to identify a track name which shows up

in iXML and BWF metadata

• Track A
• Track B
• Track C
• Track D

• Mix
• Boom
• <Add New Entry>
• <Load List From CF>
• <Save List From CF>

Rec: Take Name/Number

Numeric, auto-incrementing number used for

take identification.

<selectable alpha cha integers up to 32000,

with or without preceding 0’s>

Rec: Take Reset Mode

Defines when take numbers are reset. Reset

brings take number to <1>.

• Never

- take numbers do not reset
• When scene is changed

- take resets when scene name is changed
• When daily folder changes

- takes reset on new day
• Either scene or daily

- takes reset on either change

Summary of Contents for 702T





















































































Search results

Summary of Contents for 702T

Reviews:

Sound Devices 702T, User Manual, Page: 67 / 84

Search results

Summary of Contents for 702T

Reviews: