702T User Guide and Technical Information
47
long form recordings easy to split up into CD-R sized files for backup to inexpensive CD-R medium.
There are numerous file size breaking points sizes to ensure that files recorded will fit onto specific
media.
Setting/Clearing Flag Bits
Pressing the tone key in the File Viewer display opens the “
SET OR CLEAR FLAG BIT
” screen. The
options for setting or clearing flag bits include: set or clear the selected file, set or clear all the files in
the current folder, or set or clear all files on the volume.
All files created by the 702T have their archive bit set to on.
Automatic Flag Clearing
The recorder can be set to clear the flag bit of copied files automatically. When enabled in the Setup
Menu option
FILE: COPY FLAG RESET
, all files copied internally by the recorder will have their flag
bits cleared on the original file. Flags are not cleared when copying to a computer over FireWire.
File Copying Among Available Drives
Audio files are easily transferred between CF and the external drive. File transfer is initiated with the
setup menu option
FILE:COPY FILE
.
The Copy File menu has four options for each media type:
Copy All [Media] > [Media]:
Copies all files from one media to the other.
Last 24Hr [Media] > [Media]:
Copies files created in the last 24 hours between media.
Last 48Hr [Media] > [Media]:
Copies files created in the last 48 hours between media.
Flagged [Media] > [Media]:
Copies all files with their archive bit set between.
Once file copying has begun, the 702T searches the source media for the selected files. The 702T will
then search the destination drive looking for duplicate file names. The LCD will report the number
of files found, the number of duplicates found and the net number of files to be copied and prompt
to continue.
Pressing the enter key or controller button begins copying. The LCD will report progress of the file
being copied and the number of files remaining to be copied. When file copy is complete, the 702T
will report the number of files successfully copies and show a progress bar showing the percentage
of files successfully copied.
Error Conditions:
If a file is to large for the destination medium, the 702T will give you the option to skip the it or can-
cel copying. If an error occurs during file copying, the 702T will prompt to cancel the transfer. When
the destination medium is full, the 702T will report the error and end the transfer.