702T User Guide and Technical Information
13
Left Panel Connectors and Controls
702T
1
7
6
5
4
2
3
1)
XLR Input 1/AES3 Input 1&2
Dual function input connection. Input
type set with switch above. Active-bal-
anced analog microphone- or line-level
input for input 1. Transformer-balanced
two-channel AES3 input (1 and 2).
2)
XLR Input 2
Active-balanced analog microphone- or
line-level input for input 2.
3)
Mic-Line Input Switch
Selects the input level and mode of the
associated XLR input connector. Input 1
also can be selected for AES3 input.
4)
TA3 Master (L/R) Analog Outputs
Active-balanced, line-level analog L/R
outputs for the Master Output Bus. Pro-
gram source and attenuation level are
user selectable. Pin-1 ground, pin-2 (+),
pin-3 (
–
).
5)
Headphone Output
3.5 mm TRS stereo headphone connec-
tor. Can drive headphones from 8 to
1000 ohm impedances to very high lev-
els. Tip-left, ring-right, sleeve-ground.
6)
Headphone Level
Adjusts the headphone output level.
NOTE: the 702T is capable of producing
ear-damaging levels in headphones.
7)
Tape Output
Unbalanced tape (–10 dBv nominal)
output on 3.5 mm TRS stereo connector.
Signal source is identical to the Master
Output Bus. Tip-left, ring-right, sleeve-
ground.