Sound Devices 702T User Manual Download Page 70

Page: 70 / 84

702T User Guide and Technical Information

v. 2.67

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Setup Name

Setup Description

Setup Options

Time Code: Mode

Sets the mode for the time code generator

• Off – time code not active, recorded or output
• Free Run – time code is initialized from the jam

menu and then runs continuously regardless of

record mode
• Free Run Jam Once – time code is initialized from

an external source and updates itself to the external

source when reconnected
• Record Run – time code is initially set from the jam

value item in the jam menu. Time code generation

runs only during recording generating continuous

time code from file to file.
• 24 Hr Run – time code is initialized from the system

clock on startup and enters free run mode. Time

code is updated if the time of day clock is adjusted.
• Ext TC – applies external time code to the recorder

directly. The internal time code generator has no

effect.
• Ext TC/cont – applies external time code to the

recorder; internal generator continues to run if time

code signal is lost. Useful for time code transmission

over RF
• Ext TC-Auto Record – applies external time code

to the recorder. Unit enters Record when time code

runs and stops when time code stops.
• Ext TC/cont-Auto Record – applies external time

code to the recorder; internal generator continues

to run if time code signal is lost. Unit enters Record

when time code runs and stops when time code

stops.

Time Code: Hold Off

Sets the duration that a valid time code signal

has to be recognized by the 702T before

generating a new take while in Ext TC-Auto

Record and Ext TC/cont-Auto Record modes.

0.0 to 8.0 seconds adjustable in increments of .1

seconds

Time Code: User Bits

Sets the time code user bits generated by the

702T.
mm – month

dd – day of week

yy – year

tt – take number

uu – user-defined

• Not Used – user bits are not set or output
• mm:dd:yy.tt
• dd:mm:yy.tt
• uu:uu:tt:tt – user bits are set to 4 user definable

digits with 4 take digits
• uu:uu:uu:uu
• tt:tt:tt.tt – user bits are set to the take counter for

all 8 digits
• mm:dd:yy:uu
• dd:mm:yy:uu

Time Code: Jam Menu

Allows the user to jam or edit the internal time

code generator and user bits. (Also accessible

by pressing HDD and Menu keys simultane-

ously).

• Jam RX TC – jams the internal generator to

received external code
• Jam Zeros – resets the internal generator to zero
• Jam Value – sets the internal generator to the value

set in edit value
• Edit Value – allows to user to enter a free-form

number to initialize the time code
• Edit U-Bit – allows the user to edit allowed user bit

numbers

Time Code: Display Mode

Sets the numbers of the large numerical

display.

• Big A-time

• Big time code

Summary of Contents for 702T





















































































Search results

Summary of Contents for 702T

Reviews:

Sound Devices 702T, User Manual, Page: 70 / 84

Search results

Summary of Contents for 702T

Reviews: